How much does a 192 sq ft deck cost in Franklin, TN?
| Typical total$31 per ft² of deck | $5,863 |
|---|---|
| Range you should see in bidsthree bids on the same scope normally land inside this | $4,442 – $8,884 |
| Labor portion55% of the job — this is the part that moves by city | $3,225 |
| Material portion45% — bought at national prices | $2,639 |
| Carpenters pay near Franklinabout $27/hr · Nashville-Davidson--Murfreesboro--Franklin, TN metro | $56,730/yr |
| U.S. mean for the same tradeSOC 47-2031 | $65,630/yr |
| Versus the national pricetrade pay here runs −13.6% against the U.S. mean | −$473 |
Notes
- Where the number comes from. The national price for a pressure-treated deck build is $33 per ft² of deck — pressure-treated deck pricing published for 2026, $25–$50 per ft² installed. Labor is about 55% of that. Carpenters near Franklin, TN average $56,730 a year against a U.S. mean of $65,630 — a factor of 0.864 — so the labor half is scaled by that and the material half is not. Source: BLS OEWS May 2025 for the Nashville-Davidson--Murfreesboro--Franklin, TN metro area, SOC 47-2031.
- Why the city matters, not just the state. Trade pay moves inside a state as much as it does between states. Crews do not commute across a state to bid a job, and materials ship at national prices either way — so a metro wage is the honest input here and a state average quietly rounds four different cities into one number.
- What is in the price: footings, framing, pressure-treated decking, fasteners, a code-compliant railing, and labor.
- What is not: stairs beyond two steps, permits, ledger repair on the house, and any grading work. These are the lines that turn a $5,863 quote into a $7,329 invoice, so ask about each one before signing.
- Use this as a bid check, not a quote. It prices an average job in average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a per-unit average.
a pressure-treated deck build in Franklin, TN
$5,863 is the typical number, and three bids on the same scope normally land between $4,442 and $8,884.
That is $473 less than the same job priced at the national average.
Why the city changes the number
About 55% of this job is labor — $3,225 of the $5,863 above. Labor is the only part that moves locally; a bundle of material costs what it costs wherever it is nailed down.
Carpenters near Franklin average $56,730 a year, against a U.S. mean of $65,630. That is a factor of 0.864, so the labor half is scaled by it and the material half is not.
Source: BLS OEWS May 2025 for the Nashville-Davidson--Murfreesboro--Franklin, TN metro area, SOC 47-2031.
What the quote should include
The lines that turn a quote into an invoice
Ask about each of them before you sign. On a job this size they are the difference between $5,863 and something a quarter higher.
Use it as a bid check, not a quote
This prices an average job in average condition. Access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average.
If a bid lands outside $4,442 – $8,884, that is not automatically wrong — but it is the question worth asking out loud.
Nearby sizes
Read more
- Deck Cost by State — Priced From BLS Carpenter PayDeck quotes vary more within a town than between states, and this table shows why: carpenter pay ranges 45% across the country but only lands on 55% of the bill.
- Deck Screws per Square Foot: The Count, the Length, and the Coating That MattersRoughly 350 screws per hundred square feet at standard spacing — and the coating rating matters more to the deck's life than the count does.
- Cost to Replace Deck Boards Only: When Resurfacing Beats RebuildingResurfacing saves roughly half the cost of a rebuild, provided the frame underneath has more life left than the boards you are about to screw to it.
- Deck Board Gap: Why Wet Lumber and Composite Need Opposite NumbersThere is no single correct gap. There is a correct gap for a board that is going to shrink and a different one for a board that is going to grow.