Cost to build a 96 sq ft deck in New York
| Typical total$36 per ft² of deck | $3,443 |
|---|---|
| Range you should see in bidsthree bids on the same scope normally land inside this | $2,608 – $5,216 |
| Labor portion55% of the job — this is the part that moves by state | $1,893 |
| Material portion45% — bought at national prices | $1,549 |
| Carpenters pay in New Yorkabout $37/hr · BLS OEWS May 2025, SOC 47-2031 | $75,970/yr |
| U.S. mean for the same tradeSOC 47-2031 | $65,630/yr |
| Versus the national priceNew York trade pay runs +15.8% against the U.S. mean | +$275 |
Notes
- **Where the number comes from.** The national price for a pressure-treated deck build is $33 per ft² of deck — pressure-treated deck pricing published for 2026, $25–$50 per ft² installed. Labor is about 55% of that. Carpenters in New York average $75,970 a year against a U.S. mean of $65,630 — a factor of 1.158 — so the labor half is scaled by that and the material half is not.
- **What is in the price:** footings, framing, pressure-treated decking, fasteners, a code-compliant railing, and labor.
- **What is not:** stairs beyond two steps, permits, ledger repair on the house, and any grading work. These are the lines that turn a $3,443 quote into a $4,303 invoice, so ask about each one before signing.
- **Why state matters more than people expect.** Materials ship at national prices; crews do not move. New York sits above the national mean by 15.8%, which lands on 55% of the job and moves the total by $275.
- **Use this as a bid check, not a quote.** It prices an average job in an average condition. Steep access, a second story, a tear-off of two layers, or a crew booked out three months all move the real number, and none of them are in a per-unit average.
A 96 sq ft deck in New York
$3,443 is the typical figure, and bids on the same scope normally land between $2,608 and $5,216.
That is 96 ft² of deck at $36 each.
Why this is not the national number
The same job priced at the U.S. average comes to $3,168 — this one is $275 more.
The reason is one number, and it is a published one. Carpenters in New York average $75,970 a year against a U.S. mean of $65,630, from the Bureau of Labor Statistics OEWS release for May 2025, SOC 47-2031. That is roughly $37 an hour of trade pay, a factor of 1.158, or +15.8% against the national mean.
Labor is about 55% of this job. Material is the other 45%, and material does not care what state it is nailed down in — a pallet costs what a pallet costs. So only the labor half is scaled here, and the material half is left at national pricing.
That is the whole model, and it is deliberately simple enough to check: $1,893 of labor, $1,549 of material.
What is in this price
Footings, framing, pressure-treated decking, structural fasteners, a code-compliant railing, and labor.
What is not
Stairs past two steps price per stringer and rise. Permits and inspection are separate almost everywhere, and a deck attached to the house needs both. Ledger repair — the flashing and rim board where the deck meets the house — is the one that hides until demolition, and it is also the one that causes deck collapses.
Where composite changes the sum
Swapping pressure-treated boards for composite raises the material half, not the labor half. Framing, footings and hours barely move. So on a 96 sq ft deck in New York, expect the jump to land on $1,549, not on the total, which is why the percentage increase is smaller than the board price suggests.
How to use this against a real bid
Three quotes on identical scope should cluster. One well under $2,608 usually means something was left out of the scope rather than found cheaper — read what is excluded before reading the total. One well over $5,216 is either a harder job than average or a crew that does not want the work and priced accordingly.
The number above prices an average job in average condition. Access, story height, season, and how booked the crew is all move it, and none of those live in a per-unit average.
Nearby sizes
Read more
- Deck Cost by State — Priced From BLS Carpenter PayDeck quotes vary more within a town than between states, and this table shows why: carpenter pay ranges 45% across the country but only lands on 55% of the bill.
- Deck Screws per Square Foot: The Count, the Length, and the Coating That MattersRoughly 350 screws per hundred square feet at standard spacing — and the coating rating matters more to the deck's life than the count does.
- Cost to Replace Deck Boards Only: When Resurfacing Beats RebuildingResurfacing saves roughly half the cost of a rebuild, provided the frame underneath has more life left than the boards you are about to screw to it.
- Deck Board Gap: Why Wet Lumber and Composite Need Opposite NumbersThere is no single correct gap. There is a correct gap for a board that is going to shrink and a different one for a board that is going to grow.